Best DeWalt 20V MAX Cordless Band Saws

TL;DR: The DeWalt DCS378 packs a brushless 535 MWO motor, 570 SFPM blade speed and a 3‑3/8 in cut capacity into a 24‑lb cordless saw that’s built for professional jobsite efficiency.

The standout spec is the 570 SFPM blade speed driven by a 535 MWO brushless motor, which professional reviewers note can slice through a 12‑gauge strut in just 5.1 seconds. Coupled with a 120‑cut per charge runtime, the saw delivers rapid, repeatable cuts without the hassle of cords.

Compared with the other three models, the DCS378 is considerably heavier at 24 lb versus 6.6 lb for the DeWalt 20V MAX Atomic, 12.6 lb for the WEN cordless bandsaw, and 14.49 lb for the DeWalt DCS376. Its 35‑7/8 in blade is longer than the Atomic’s 27‑1/4 in blade but shorter than the 44‑7/8 in blades on the WEN and DCS376 units. Blade speed outpaces the Atomic’s 150‑380 SFPM, the WEN’s 60‑420 FPM range, and the DCS376’s up‑to‑490 SFPM, while its 3‑3/8 in cut capacity sits between the Atomic’s 1‑3/4 in and the 5‑in depth/width offered by the WEN and DCS376.

User feedback repeatedly praises the fast cut time and the ability to get roughly 120 cuts on a single charge, making it a favorite for electricians and plumbers who need consistent performance on the jobsite. The downside most users mention is the 24‑lb weight, which can feel hefty during extended handheld work, and the 3‑3/8 in capacity that limits cutting of thicker pipe or stock. Because the tool ships as a bare unit, you’ll also need to purchase compatible 20 V MAX XR batteries and a charger separately.

Best for: Professional contractors, electricians, plumbers and fabricators who need a high‑speed, cordless band saw—Blade Speed: 570 SFPM.

Avoid if: You require deeper cuts for heavy pipe work or need a lightweight tool for prolonged handheld use.

TL;DR: The DeWalt DCS376 delivers a 44‑7/8‑in blade and up to 0 to 490 SFPM speed in a compact 14.49‑lb package, but its $446.99 price and tool‑only setup may limit casual buyers.

What really sets the DCS376 apart is its 44‑7/8‑in blade paired with a rectangular cutting capacity of 5 in × 4‑3/8 in, letting you tackle deep‑cut metal jobs that many compact band saws can’t reach. The brushless motor pushes the blade at 0 to 490 SFPM, and the tool‑less lever blade guide makes tension adjustments quick and tool‑free. At 6.27 in tall, 22.4 in long and 11.0 in wide, the saw packs a lot of capability into a relatively small footprint.

Compared with the other three band saws in this roundup, the DCS376 sits in the middle of the weight spectrum—lighter than the 24‑lb DCS378 but heavier than the 6.6‑lb Atomic and the 12.6‑lb WEN model. Its blade length outstrips the DCS378’s 35‑7/8 in and the Atomic’s 27‑1/4 in, matching the WEN’s 44‑7/8 in. Blade speed is faster than the WEN’s 420 SFPM and the Atomic’s 150‑380 SFPM, yet a bit slower than the DCS378’s 570 SFPM. The DCS376 also offers a longer overall length (22.4 in) than the DCS378 (16.8 in) and the WEN (20.5 in), giving you a more stable base on the job site.

Professional reviewers highlight the high cutting capacity and the brushless motor’s consistent speed as major strengths, while users note the tool‑only configuration means you’ll need to buy a compatible 20 V MAX* battery and charger separately. The 14.49‑lb weight can cause fatigue during prolonged one‑handed use, a point echoed in consumer comments. Safety‑focused features like two‑handed operation, a dual‑switch activation, and a 20‑second LED light delay add confidence on the shop floor.

Best for: Those prioritizing quality and willing to pay for premium performance — the DeWalt DCS376 offers Blade Speed: 0 to 490 SFPM

Avoid if: You need higher power than the 20 V platform provides or prefer a bundled kit with battery and charger included.

TL;DR: The DeWalt 20V MAX Atomic packs a 27.25‑in blade, 6.6‑lb weight and variable 150‑380 SFPM speed into a truly portable, one‑handed bandsaw for tight‑space metal cuts.

The standout spec is its ultra‑lightweight design – at just 6.6 lbs the Atomic feels almost like a handheld drill, yet it still drives a 27.25‑in blade and delivers a blade speed range of 150‑380 SFPM. Its brushless motor and true variable speed control let you dial in the perfect RPM for electrical conduit or plumbing pipe, while the integrated LED and pivoting guard keep the work area visible and safe.

Compared with the other three band saws in this roundup, the Atomic is considerably lighter than the WEN model (12.6 lbs) and far lighter than the larger DeWalt DCS378 (24 lbs) and DCS376 (14.49 lbs). Its blade is shorter than the 44‑7/8 in blades on the WEN and DCS376, and the DCS378’s 35‑7/8 in blade, but the trade‑off is a tool you can swing overhead or tuck into a crowded toolbox. Blade speed also sits below the DCS378’s 570 SFPM, but the Atomic’s speed‑control flexibility still covers most DIY metal‑cutting tasks.

Professional reviewers praise the 6.6‑lb weight for enabling one‑handed and overhead cuts on EMT, strut and all‑thread, calling the tool “compact” enough to rival many 12 V units. Users echo that sentiment, noting the convenience of the single‑point tracking adjustment and the built‑in lanyard hook for job‑site safety. The main criticism is the modest 1‑3/4 in (≈1.7 in) cut capacity, which limits the Atomic to smaller diameters and excludes deeper rectangular cuts.

Additional technical context includes a brushless motor, true variable speed control, and Tool Connect chip readiness (DCE042) for app‑based monitoring. The integrated guard pivots for quick blade changes, and the LED lighting brightens dark work zones without adding bulk.

Best for: Entry‑level buyers or those on a tight budget — the DeWalt 20V MAX Atomic offers Blade Speed: 150‑380 SFPM

Avoid if: You need advanced features or professional‑grade performance

TL;DR: The WEN 20V Max cordless bandsaw packs a 5 × 5‑inch cutting capacity, a 5.0 Ah battery and six speed settings into a 12.6‑lb, 6.7‑inch‑high package for budget‑friendly metal cutting.

The standout spec is the 5 × 5‑inch cutting capacity, which lets you handle rebar, angle iron and thick stock that many cordless rivals can’t reach. Combined with a blade length of 44.875 in and a variable speed range from 60 to 420 FPM across six settings, the saw adapts to both slow, heavy cuts and faster, finer work. Its ball‑bearing blade guides and tool‑free blade installation add a level of precision and convenience that users frequently mention.

Compared with the three DeWalt models in this roundup, the WEN sits in the middle of the weight spectrum—heavier than the 6.6‑lb Atomic but lighter than the 24‑lb DCS378 and the 14.49‑lb DCS376. It also out‑sizes the Atomic’s 27‑¼‑in blade with a 44.875‑in blade, and matches the DCS376’s blade length while offering a longer cut depth (5 in) than the Atomic’s 1‑¾‑in capacity. Speed-wise, its 420 FPM top speed exceeds the Atomic’s 150‑380 SFPM range but falls short of the DCS378’s 570 SFPM.

Reviewers appreciate the generous 5 × 5‑inch cutting envelope and the fact that the battery, charger and two Allen keys ship in the box, so you can start cutting right away. Professionals note the sturdy ball‑bearing guides and the LED battery gauge as practical touches. On the downside, the speed dial lacks markings, which forces users to guess the exact setting, and the trigger‑activated switch requires you to hold the button for every cut—something that can tire the hand during longer jobs. Noise during operation and the absence of a brushless motor are also recurring complaints.

Best for: Entry-level buyers or those on a tight budget — the WEN Cordless Portable Bandsaw offers Height: 6.7 inches

Avoid if: Reliability and user satisfaction are your top concerns