Best DJI Airdrop & Payload Delivery Accessories

TL;DR: At $37.89, the XTnueotr Drone Airdrop System adds just 30 g, offers a 10‑second drop within 1 km, and fits DJI Mini and Air drones via a Velcro strap, but only carries up to 100 g.

The XTnueotr unit weighs only 30 g (0.0661386786 lb) and can release a payload in 10 seconds at a distance of up to 1 km, making it lighter than most drop mechanisms.

Compared with the Alomejor kit, which tips the scales at 0.220462262 lb, the XTnueotr is markedly lighter, though its 100 g payload ceiling is far below the 726 g capacity of the Amanely system and the 1 kg limit of the Amomket delivery kit. It shares the same weight class as the Erdone device but offers a simpler remote keypad instead of a micro‑USB‑charged unit.

Users praise the lightweight design and the Velcro strap that slips between sensors without obstructing the camera, while professional reviewers note the convenience of a dedicated keypad and the recyclable ABS housing. The main trade‑off is the modest 100 g payload, which limits the system to small gifts, toys, or water balloons, and the basic plastic build may feel less rugged than premium alternatives.

Best for: Value-conscious buyers seeking quality at $37.89

Avoid if: You need to carry heavy payloads or require professional‑grade delivery performance

TL;DR: The Amanely Drone Airdrop System offers a 1 km LoRa range, tool‑less mounting, and a 726 g payload capacity for $39.99, making it a solid, budget‑friendly choice for most DJI mini drones.

The standout spec is its 1000 m wireless range, LoRa technology powers it, which lets you trigger drops from a safe distance. It also handles up to 726 g of payload, far above the 100 g minimum, and you can adjust the hook position with a side button for precise releases. The device weighs 0.35 pounds (159 g) and measures 127 mm in height and length with a 76 mm width, all while mounting without any tools using straps or a groove‑slot fitting.

Compared with the other eleven kits, Amanely is heavier than ultra‑light options like Beciquook (0.066 lb) and XTnueotr (0.066 lb), but matches the weight of Amomket (0.35 lb). Its 726 g maximum payload sits between XTnueotr’s 100 g limit and Alomejor’s 1000 g capacity, and is just shy of Craznick’s 750 g rating. The 1 km range aligns with the 1 km ranges reported for Beciquook, Erdone, and several peers, while its tool‑less straps give it an edge over Velcro‑bound designs.

Users love the one‑click remote operation and the fun factor of dropping small items, noting that the sling and small hoop make set‑up quick. Professional reviewers praise the clean, minimal design and the reliable long‑range control. The most common complaints focus on the thin legs, which can wobble with heavier loads, and a plastic build that may start to degrade after roughly ten flights. Some owners also report occasional sensor interference if you don’t mount the unit between the drone’s camera and lidar.

Beyond the core specs, the system markets itself as universally compatible with DJI Mavic Mini/Pro and any RC drone that can lift more than 100 g. It includes a motor‑driven release mechanism, a sling, a small hoop, and simple instructions. The manufacturer doesn’t list battery capacity or standby time, but the integrated rechargeable battery powers the LoRa link for the advertised range.

Best for: Hobbyist drone pilots with small DJI models who want an inexpensive, easy‑install airdrop system.

Avoid if: You need heavy payload capacity, rugged durability for commercial use, or are concerned about long‑term plastic wear.

TL;DR: The Cengnian Drone Airdrop System costs $11.43, weighs 0.2 lb (90.7 g), and offers a 12‑hour standby with a 100 m remote range, making it a budget‑friendly, lightweight option for DJI hobbyists.

The standout spec is its ultra‑light construction: at 0.2 pounds (90.7 g) and compact dimensions of 45.7 × 88.9 × 109.2 mm, the unit adds minimal load to any DJI drone. A 150 mAh rechargeable battery provides up to 12 hours of standby time, and the remote control works reliably up to 100 m, which is ample for most casual drop scenarios.

Compared with the other eleven entries, this model is the most affordable and sits near the low‑end of the weight spectrum. It's slightly heavier than the Aojudic system’s 0.18 pounds but still lighter than the Lichifit unit’s 0.07 pounds, and its remote range of 100 m is shorter than Aojudic’s 1 km range. The battery holds a modest 150 mAh versus the 350 mAh found in several peers, so charging in 1.5 hours is quick but the energy reserve's lower.

User feedback highlights the “extremely lightweight” feel, noting that the device hardly affects flight performance. Reviewers also point out the practical payload ceiling of 60–500 g, with many Mini‑series users staying around 60–100 g due to their own drone’s power limits. The universal compatibility with DJI Mini, Mavic and Air models, plus a micro‑USB or Type‑C charging port, makes installation straightforward.

Best for: Hobbyist drone pilots on a tight budget who need a lightweight, universal drop system.

Avoid if: You require payloads over 500 g, a remote range beyond 100 m, or higher‑capacity batteries for extended autonomous operations.

TL;DR: The Amomket Drone Payload Delivery System adds a 1 kg‑capacity, remote‑release hook to DJI drones for $42.49, offering a lightweight 0.35 lb design, 5‑hour runtime and 300‑hour standby.

This kit’s standout spec is its 1 kg maximum load capacity while weighing only 0.35 pounds (159 g). The built‑in 400 mAh, 3.7 V battery powers up to 5 hours of continuous operation and can sit idle for 300 hours, giving you plenty of drops before recharging. The 2.4 GHz remote provides a 1 km control range, and the one‑button release activates via a side‑button‑adjustable hook.

Compared with the other eleven kits, the Amomket unit is heavier than the ultra‑light Beciquook and XTnueotr systems (both around 0.07 lb) but matches Amanely’s 0.35 lb weight. Its payload capacity of 1 kg exceeds Amanely’s 726 g limit and far surpasses the 100 g‑100 g caps of XTnueotr and Erdone. The device’s dimensions (75 mm × 50 mm × 50 mm) are shorter than Amanely’s 127 mm height, keeping the profile compact on your drone.

Users appreciate the velcro‑strap installation, noting that it “takes seconds” and doesn’t interfere with onboard sensors. Reviewers repeatedly call the remote release “reliable” in short‑range tests. However, several reviewers mention the plastic housing feels basic and can crack in windy conditions, and the strap may loosen mid‑flight, requiring occasional re‑tightening.

Best for: Hobbyists and beginner drone pilots who want an easy‑install, remote‑controlled payload release with a solid 1 kg capacity.

Avoid if: You need a rugged, heavy‑payload solution for professional delivery or SAR missions.

TL;DR: The Erdone Drone Release Device is a 30 g, 1 km‑range, motor‑driven airdropper with 12‑hour battery life that clips onto DJI Mavic Mini, Mini 2, Air 2, Air 2S and Mavic 3 drones.

At just 30 g (about 0.07 lb) and measuring 25.4 mm × 152.4 mm × 50.8 mm, this unit is one of the most compact options in the lineup. Its 350 mAh, 3.7 V battery promises up to 12 hours of standby time, while the motor‑driven release can be triggered from as far as 1 km away.

Compared with the other eleven contenders, the Erdone sits on the lighter side – lighter than the Craznick model (≈0.08 lb) and roughly on par with the XTnueotr and Beciquook devices, which share the same 0.07 lb weight. Its 1 km remote control distance also outstrips Craznick’s 150 m range, giving you more flexibility than several peers that list shorter distances or none at all.

Reviewers appreciate the Velcro attachment for its tool‑free installation and the included sling, small hoop, and parachute that make it ready for bait‑drop or small payload missions right out of the box. The most common criticism is its limited compatibility – it’s designed for the DJI Mini and Air series and won’t mount on Phantom 3/4 or Inspire 1/2 models, so users with those drones need a different solution.

Built from a 3D‑printed environmentally friendly material and charged via a micro‑USB port, the device balances durability with easy upkeep. The motor‑driven fast‑response mechanism ensures a reliable release, and several hobbyist reviews highlight this point.

Best for: Recreational anglers and drone‑fishing hobbyists who need a lightweight, easy‑install airdropper for compatible DJI Mavic series drones.

Avoid if: Your drone is a DJI Phantom 3/4, Inspire 1/2, or any model not listed as compatible.

TL;DR: The Beciquook Drone Airdrop System offers a 1 km control range, ultra‑light 0.07 lb build and versatile hook adjustment, making it a solid mid‑range choice for DJI hobbyists.

What really stands out is the 1 km remote control range, which the specs list as “Effective Release Distance: Exceeding 1 km.” That distance lets you drop items well beyond visual line of sight, a rare capability at this price point.

At roughly 0.07 lb (30 g), the unit weighs as little as the XTnueotr and Erdone models, both weighing the same 0.07 lb. It’s noticeably lighter than the Amanely system, which tips the scales at about 0.35 lb, and also lighter than the Craznick and Amomket options that sit near 0.35 lb as well.

Users have given it a 4.2‑star average across 33 reviews, indicating generally positive experiences. Reviewers frequently praise the shielded anti‑interference design and the adjustable hook button for precise drops, whether it’s a fishing lure or a wedding ring. A few comments note that the Velcro mounting method feels less permanent than a hard‑wired clip.

The system clips onto a wide array of DJI drones—including Mini 4 Pro, Mini 2, Air 2S and Mavic 3—so you won’t need extra adapters. The side black button lets you fine‑tune hook position, which users find handy for varied payloads.

Best for: Most users seeking a balanced, mainstream option

Avoid if: You need a hard‑mounted release mechanism or detailed payload limits

TL;DR: The Craznick Drone Airdrop System adds a 750 g payload capacity, 12‑hour standby and one‑button drops to DJI Mini and Mavic drones for just $29.95, though it adds about 35 g of weight.

What really stands out is the 750 g maximum load capacity, letting you carry small packages, toys or gifts. The unit is only 35 g (≈0.08 lb) and operates with a single button, delivering a payload within 10 seconds of command. Its built‑in 350 mAh battery provides up to 12 hours of standby time and recharges via USB in about 1.5 hours.

Compared with the other eleven accessories in this roundup, the Craznick weighs more than the Erdone and XTnueotr models (both around 0.07 lb) but less than the Alomejor kit, which tips the scales at roughly 0.22 lb. Its 750 g payload beats XTnueotr’s 100 g limit, yet falls below Alomejor’s 1000 g capacity. The 150 m remote‑control distance falls short of the 1 km range many rivals advertise, such as Erdone, Aojudic and Beciquook.

User feedback praises the easy, tool‑free installation and the fun of dropping items from a Mini 4 Pro, with several reviewers noting the system works straight out of the box. Professional reviewers also highlight the straightforward USB charging and the reliable one‑click release. On the downside, owners of lighter Mini drones report a modest reduction in flight time due to the added 35 g, and they'll advise planning for the 1.5‑hour recharge before extended sessions.

The Craznick runs on a 2.4 GHz wireless link and works with a broad range of DJI models, from Mini 4 Pro and Mini 3 Pro to Air 3 and Mavic 3 Pro. It supports roughly 600 on/off cycles per full charge, so you get plenty of drop opportunities before the battery needs a top‑up.

Best for: Entry-level buyers or those on a tight budget

Avoid if: You need advanced features or professional‑grade performance

TL;DR: The Drone SKY Hook offers a 220 m LED searchlight, 200+ drops per charge and dual‑payload support for DJI Phantom 3/4, but its $249 price makes it a premium choice.

The most eye‑catching spec is the integrated LED searchlight with a range of 220 m (725 ft), which lets you locate dropped items even in low‑light conditions. Housed in a compact 20.3 mm × 165.1 mm × 25.4 mm ABS shell, the unit weighs 56.7 g (0.125 lb), preserving the drone’s thrust‑to‑weight ratio for heavier loads.

Compared with the other eleven options, the SKY Hook is noticeably heavier than the Waillynice model (0.0375 lb) and the XTnueotr system (0.066 lb), yet lighter than the Amomket kit (0.35 lb). Its 165.1 mm length also exceeds the 25.4 mm profile of the XTnueotr, giving it more internal space for the dual‑payload mechanism. Feature‑wise, it lists far more capabilities—four release modes, an AUX channel, and a sensor‑interference avoidance system—while many peers provide only basic drop functions.

User sentiment highlights the device’s lightweight feel (around 59 g according to reviewers) and the convenience of over 200 drops per charge. Manufacturer lists a lift capacity of roughly 3 lb, and notes that exceeding the recommended 500 g payload can overload the system. Older Phantom 3 models also lack dedicated C1/C2 buttons, a point frequently mentioned in user feedback.

Additional technical context includes a battery indicator, tool‑free mounting, and unlimited operational range. The dual‑payload support accommodates up to 1.5 kg momentary lift (Phantom 4) with a safe max of under 800 g, and the Sensors Interference Avoidance System guarantees no VPS sensor disruption.

Best for: Hobbyists and semi‑professional drone operators who fly DJI Phantom 3 or 4 models and need a lightweight, feature‑rich payload system.

Avoid if: You're on a tight budget, require precise servo‑based drops, or need a fully integrated system without separate accessories.

TL;DR: The Lichifit Drone Airdrop System weighs just 0.07 lb (32 g), offers a quick‑release 2.4 GHz remote and 12‑hour standby, making it a budget‑friendly option for light‑payload drops.

This unit’s most eye‑catching spec is its ultra‑lightweight design – only 32 g (0.07 lb) and a compact 5.3 × 5.5 × 2.5 cm footprint. It mounts with an adjustable Velcro strap and releases payloads via a one‑click RF remote, so you won’t add noticeable drag to your DJI Mini or Mavic drone.

Compared with peers, Lichifit is lighter than the Aojudic system (0.18 lb) and the Craznick model (≈0.08 lb), yet a shade heavier than Erdone’s 0.07 lb unit. Its 350 mAh battery and 12‑hour standby match the capacity and endurance found in most competitors, while the 2.4 GHz remote frequency also meets the lineup’s standard.

Users consistently highlight the tool‑free Velcro installation and the reliable one‑click release, calling it “ultra‑lightweight” and “easy to set up.” Professional reviewers noted a successful 170 g outdoor drop, but they also pointed out the lack of an included remote battery and the ambiguous payload limits that some users find confusing.

Technical details include a CMOS optical sensor for payload detection, a 3.7 V supply, and compatibility with a broad range of DJI models (Mavic 3, Mini 2, Mini SE, Air 2S, etc.) plus other drones via the Velcro strap. The remote operates on a 2.4 GHz RF link and offers a single‑click release, while the built‑in 350 mAh battery provides up to 12 hours of standby time.

Best for: Entry-level buyers or those on a tight budget

Avoid if: You want the best value‑per‑dollar in its price range

TL;DR: The Waillynice Drone Drop Release weighs just 0.0375 lb (82 g total), offers a ≈2 km remote range, and fits a wide range of DJI drones, but its $65.99 price is higher than many competing kits.

The standout spec is its ultra‑light construction: the whole system tips the scales at only 0.0375 pounds, with the thrower itself weighing 32 g and the remote just 13.2 g. That low mass means you won’t noticeably affect your drone’s flight time, and the ABS plastic housing keeps the unit sturdy without adding bulk.

When you line it up against the other eleven options, the Waillynice unit costs more than the Amomket Drone Payload Delivery System ($42.49) and the Amanely Drone Airdrop System ($39.99). However, at 0.0375 pounds it’s dramatically lighter than those models, which list weights around 0.35 pounds. It also undercuts the Beciquook and XTnueotr kits in weight (both around 0.066 pounds) while offering a longer remote control range of roughly 2 km compared with the 1 km range most peers cite.

Reviewers appreciate the “simple lock slot, quick assembly” design and the light‑induction delivery method, noting that the remote activates the release reliably even at the edge of its advertised range. The three‑star reviews highlight the device’s ease of installation on DJI Mavic 3, Mavic 2, Air 2, Air 3, Mini 4 Pro, Mini 3 Pro and other listed models. Users also like that the package includes a thrower and a Type‑C charging cable, so you can get started right out of the box.

Additional technical context: the system works via both light induction and remote control, giving you flexibility in how you trigger a payload drop. Compatibility spans most current DJI consumer drones, and the included accessories (thrower and charging cable) mean no extra purchases are required. The one‑year free replacement warranty plus lifetime service adds a layer of confidence for hobbyists.

Best for: Those prioritizing quality and willing to pay for premium performance

Avoid if: You're on a tight budget or only need basic functionality

TL;DR: The Aojudic PX001 offers a 750 g payload capacity, 1 km control range and tool‑free Velcro mounting for $25.80, but its 3.1‑star rating suggests mixed user experiences.

The standout spec of the Aojudic system is its 750 g payload capacity paired with a 1 km remote‑control range, letting you drop items up to 750 g from up to 1 km away.

Compared with the other eleven kits in this roundup, the PX001 is noticeably heavier – at 0.18 pounds it outweighs the Lichifit, Craznick and Erdone units, which sit around 0.07 pounds. Its battery capacity matches the 350 mAh cells found in Lichifit, Craznick, Erdone and Beciquook, so you won’t lose out on endurance there. The 1 km range ties it with Erdone, XTnueotr and Beciquook, and far exceeds the 150 m range of the Craznick model. Payload‑wise, it matches Craznick’s 750 g limit but falls short of Alomejor’s 1000 g allowance.

User feedback highlights the universal compatibility – the PX001 clips onto more than 50 DJI drones, including the Mini 4 Pro, Air 3 and Mavic 3 Pro. Reviewers appreciate the tool‑free Velcro installation and the water‑resistant motor that can handle rain or salty air. However, the 3.1‑star average from 17 reviews points to concerns about reliability and overall satisfaction, which is lower than most peers in the set.

Best for: Entry‑level buyers or those on a tight budget

Avoid if: Reliability and user satisfaction are your top concerns

TL;DR: The Alomejor Universal Drone Delivery Kit adds a remote‑controlled dispenser for up to 1 kg payload, weighs just 100 g, and fits compactly on DJI Mini 4 Pro or Air 3 drones for hobby‑level drops.

The kit’s standout spec is its 1 000 g maximum load capacity, while the manufacturer recommends 400 g for the DJI Air 3 and only 60 g for the Mini 4 Pro. At a physical weight of 100 g (about 3.53 oz) and dimensions of 66 mm × 94 mm × 46 mm, the unit adds minimal mass and sits neatly on the belly of small drones. A built‑in remote control lets you trigger drops without landing.

Compared with the other eleven options, the Alomejor system is heavier than the ultra‑light XTnueotr and Beciquook models (both around 0.066 lb) but considerably lighter than the Amanely and Amomket kits, each near 0.35 lb. Its payload ceiling of 1 kg exceeds the 100 g limit of the XTnueotr and the 750 g ceiling of the Craznick unit, positioning it as a mid‑range alternative that balances capacity and weight.

Reviewers praise the kit’s “ultra‑lightweight construction” and “compact dimensions,” which maintain the drone’s handling. However, users also note the “limited verified payload recommendations” – 60 g for Mini 4 Pro and 400 g for Air 3 – which can feel restrictive for more ambitious drops. Professional reviewers note the remote control provides practical convenience for hobbyists.

Best for: Hobbyists and semi‑professional operators of lightweight DJI drones who want a remote‑controlled drop mechanism without sacrificing too much flight performance.

Avoid if: You need to carry heavy payloads beyond the recommended 60 g–400 g range or are seeking the cheapest, lightest possible add‑on for commercial lift tasks.