Best Drills with Multiple Torque Settings

TL;DR: The Comoware 20V Cordless Drill delivers 266 in‑lbs of torque, 1500 mAh battery capacity and a 34‑piece accessory kit for just $31.99, making it a high‑power, budget‑friendly option for DIY projects.

The standout spec is its 266 in‑lbs maximum torque paired with a 25+1 clutch, which lets you tackle tough wood and masonry without stripping screws. The 3/8‑inch keyless chuck and two variable speeds (0‑350 RPM low, 0‑1300 RPM high) give you fine control for both drilling and driving tasks.

Compared with the other eleven drills in this roundup, the Comoware sits at the heavier end at 5.2 lb, outweighing the DEKO PRO (2.5 lb) and the Ryobi ONE+ (2.1 lb tool‑only). It also carries a larger battery capacity than the 12 V peers, but its single 1500 mAh pack means runtime is shorter than models that include two batteries, such as the Pulituo 20V.

User sentiment highlights the drill’s ease of use for beginners and the value of its comprehensive 34‑piece kit, which includes 3 Brad‑point bits, 3 HSS twist bits, 16 screwdriver bits and an extension bar. Reviewers praise the fast 1‑hour charge and the built‑in LED work light, while noting that the battery can drain quickly during prolonged high‑torque work. Professional reviewers echo the torque strength and variable‑speed flexibility, calling it “effortlessly overcomes resistance in tough materials.”

Best for: Most users looking for a well‑reviewed, reliable mainstream option — the Comoware 20V Cordless Drill offers Battery Capacity: 1500mAh

Avoid if: Reliability and user satisfaction are your top concerns

TL;DR: The DEKO PRO 20V Cordless Drill packs a brushless motor, 350 in‑lb torque and a 1.5 Ah battery into a 2.5‑lb, LED‑lit tool that’s hard to beat for budget DIY work.

The standout spec is its brushless 20 V motor delivering up to 350 in‑lb of torque and a speed range of 0‑350 RPM low to 0‑1350 RPM high. Paired with a 1.5 Ah lithium‑ion battery, the drill can run long enough for typical household projects while staying under 2.5 lb, making it easy to control for extended use.

When you line it up against the other eleven drills in this roundup, the DEKO PRO is noticeably lighter than the Pulituo 12V (about 3.1 lb) and the Yougfin model (about 4.3 lb), and it’s also lighter than the Comoware 20V (around 5.2 lb). Its 2‑speed transmission gives it more flexibility than single‑speed tools, and the 18+1 torque settings provide finer control than many entry‑level competitors. While the Ryobi ONE+ HP Drill pushes 400 in‑lb of torque, the DEKO PRO’s 350 in‑lb is still ample for light‑to‑medium tasks and comes at a far lower price point.

Reviewers consistently praise the drill’s compact size and the convenience of the included 10‑piece screwdriver bit set plus a magnetic bit holder. The LED worklight is highlighted as a helpful feature in dim spaces, and the brushless motor earns kudos for smoother operation and longer runtime compared with brushed alternatives. On the flip side, users note that the 350 in‑lb torque ceiling and the modest 1.5 Ah battery can feel limiting on longer, heavy‑duty jobs, meaning you may need to pause for recharges more often than with higher‑capacity kits.

Best for: Budget-conscious buyers seeking a reliable entry-level option — the DEKO PRO 20V Cordless Drill offers Battery Capacity: 1.5 Ah

Avoid if: You need advanced features or professional‑grade performance

TL;DR: The Fadakwalt 12V Cordless Drill offers a 21+1 clutch, 1300 mAh battery and LED light for $21.99, delivering 180 in‑lb torque in a lightweight 3.14‑lb package.

The standout feature is the 21+1 position clutch, giving you 21 torque settings plus a free‑run mode, while the 1300 mAh lithium‑ion battery supplies enough power for most home projects. At a maximum torque of 180 in‑lb, the drill can handle wood, metal and basic masonry tasks without bogging down.

Compared with the other eleven drills in this roundup, the Fadakwalt sits at the budget end of the price spectrum and is lighter than the Yougfin Cordless Drill (4.3 lb) yet a bit heavier than the DEKO PRO 20V (2.5 lb). Its 650 RPM top speed matches the Pulituo 12V model but falls short of the Yougfin’s 1400 RPM, so it’s not the fastest option. Torque-wise, it outperforms the Pulituo 12V’s 168 in‑lb and sits comfortably below the Ryobi’s 400 in‑lb, placing it solidly in the entry‑level tier.

Reviewers consistently praise the variable speed control for letting you fine‑tune the drill’s output, and the forward/reverse switch plus built‑in LED make tight, dimly lit spaces easier to work in. The included magnetic flexible shaft, extension bar, screw anchor set and carrying case mean you can start a DIY project straight out of the box. Professional reviewers note that while the tool feels sturdy, the 12 V platform and 650 RPM limit keep it from being a work‑horse on demanding construction sites.

Best for: Budget‑conscious buyers seeking a reliable entry‑level option — the Fadakwalt 12V Cordless Drill offers Battery Capacity: 1300 Milliamp Hours

Avoid if: You need advanced features or professional‑grade performance

TL;DR: At $29.99, the Pulituo 12V Cordless Drill delivers 168 in‑lb of torque, a 21+1 clutch, and a full accessory kit in a lightweight 3.09‑lb package, making it a solid budget choice.

The drill’s standout spec is its 21+1 position clutch paired with a 12‑volt lithium‑ion battery that produces a maximum torque of 168 inch‑pounds. With a maximum rotational speed of 650 RPM and a keyless 10 mm (3/8‑inch) chuck, it handles common household screws and small fasteners without needing extra adapters. Its compact dimensions—58.4 mm tall, 203.2 mm long, and 198.1 mm wide—keep the tool easy to maneuver in tight spaces.

Compared with the other eleven drills in this roundup, the Pulituo sits in the middle of the weight range at about 3.09 pounds. It’s lighter than the Comoware 20V, which weighs 5.2 pounds, but a touch heavier than the DEKO PRO at 2.5 pounds. Speed‑focused rivals such as the DEKO PRO list a high‑speed range up to 1,350 RPM, so Pulituo’s 650 RPM is modest. While the Comoware 20V tops the rankings for professional‑grade power, Pulituo’s feature set and price tag position it as the budget pick in this group.

Reviewers appreciate the comprehensive accessory bundle: the set includes a charger, a flexible shaft/extension, four drill bits (4–8 mm), ten driver bits, and a screw‑anchor kit. The built‑in LED light helps illuminate dim work areas, and the lightweight build reduces user fatigue during longer projects. However, users note that the battery’s connection can feel tight at first, and the lack of a battery‑indicator light means you won’t know the charge level until the drill stops.

Best for: Budget-conscious buyers seeking a reliable entry-level option — the Pulituo 12V Cordless Drill offers Chuck Size: 10 millimeters (3/8-inch)

Avoid if: You want the best value‑per‑dollar in its price range

TL;DR: The DeWalt DCD771B packs a 20V MAX motor, 300 UWO output and 230 ft‑lbs of torque into a 3.28‑lb, compact drill with 16 clutch settings and a handy 20‑second LED light.

This model’s standout spec is its 300 UWO motor paired with a 2‑speed transmission that reaches up to 0‑1,500 RPM. Combined with a 230 ft‑lbs torque rating and 16 + drill‑mode clutch positions, it delivers solid power for wood and metal tasks while staying light enough for overhead work.

At 3.28 pounds, the DCD771B sits heavier than the Ryobi ONE+ HP Drill’s 2.1 lb body but lighter than the Pulituo 20V’s 5.2‑pound unit, placing it in the mid‑range of the roundup’s weight spectrum. Its clutch offers fewer positions than the Ryobi Hammer’s 24‑step range, yet more than the DEKO PRO’s 18+1 setting, giving you a balanced level of torque control. Price‑wise, it commands a higher tag than the sub‑$40 competitors, reflecting DeWalt’s brand premium.

Reviewers consistently highlight the drill’s ergonomic handle and the quick‑action, single‑sleeve keyless chuck, noting how easy it is to swap bits on the job. The LED lamp, which stays lit for 20 seconds after release, gets repeated praise for illuminating dark workspaces. On the flip side, users point out that the plastic chuck feels less robust than metal alternatives and that buying the bare tool means you’ll need to purchase a 20V MAX battery separately. Professionals also mention that while the drill handles typical DIY jobs well, it can feel under‑powered for large lag bolts or masonry work.

Additional technical context includes an electric brake for rapid stop, a variable‑speed trigger for fine speed control, and a 1/2‑inch single‑sleeve ratcheting keyless chuck that accepts standard bits. The tool’s compact dimensions—2.75 inches tall, 7.5 inches wide and 8.5 inches long—make it easy to maneuver in tight spaces, a feature often cited by homeowners working in confined areas.

Best for: Most users looking for a well‑reviewed, reliable mainstream option — the DeWalt DCD771B offers Clutch Settings: 16 + drill mode.

TL;DR: The Ryobi ONE+ HP Drill packs 400 in‑lbs of torque into a 6.4‑inch, 2.1‑lb body with a brushless motor, LED light and a 1/2‑inch chuck for tight‑space DIY work.

The standout spec is its 400 in‑lbs of maximum torque delivered by a brushless motor, all while weighing just 2.1 lbs and measuring 6.4 inches in height, length and width. The 23+1 clutch positions let you fine‑tune torque for screws and bolts, and the built‑in LED worklight shines directly on the bit.

Compared with the other drills in this roundup, the Ryobi is lighter than the DEKO PRO 20V (2.5 lbs) and considerably lighter than the Pulituo 20V model (about 5 lbs). It’s also more compact than the DeWalt DCD771B, whose length stretches to 8.5 inches versus Ryobi’s 6.4 inches. Speedwise, Ryobi’s second‑speed range tops out at 0‑1,700 RPM, outpacing the DEKO’s 0‑1,350 RPM, while still staying smaller than the bulkier 12 V Pulituo that peaks at 650 RPM.

Users consistently praise how the drill slips into cramped cabinets and stays comfortable during overhead work, thanks to the plastic knurled grip and its feather‑light 2.1‑lb frame. Reviewers also note the LED light as a handy touch for dim areas. The main criticism is the 400 in‑lb torque ceiling, which some DIYers find limiting for tougher jobs, and the lack of a hammer function keeps it from tackling masonry.

Professional reviewers highlight the brushless motor’s thermal efficiency, noting that heat stays near the rear motor and doesn’t creep down the handle—a benefit for prolonged light use. The single‑sleeve ratcheting chuck makes bit changes quick even with gloves on, and the Ryobi ONE+ ecosystem compatibility means you can swap the battery across more than 300 tools.

Best for: Most users looking for a well‑reviewed, reliable mainstream option — the Ryobi ONE+ HP Drill offers Chuck Size: 1/2 inch

Avoid if: You're shopping on a tight budget — it's priced at $60.63

TL;DR: The Kobalt 24‑Volt Max Drill packs 850 in‑lbs of torque and a 32,000 BPM hammering rate in a 4.0‑lb brushless package, but its premium price and heft suit pros more than casual DIYers.

What really sets this drill apart is its raw power: a brushless motor delivers a peak torque of 850 in‑lbs and a hammering rate of 32,000 BPM, both listed in the official specs. Those numbers let you drive large auger bits or lag screws without the tool stalling, and the 2‑speed transmission (0‑550 RPM low, 0‑2000 RPM high) gives you a wide speed band for both drilling and driving tasks.

Compared with the other eleven drills in the roundup, the Kobalt is heavier than the Ryobi ONE+ Hammer (3.14 lb) and the Ryobi ONE+ HP (2.1 lb) but lighter than the Bosch GSR12V‑140FCB22 (6.19 lb). Its 850 in‑lbs torque outstrips the Bosch’s 265 in‑lbs and the Ryobi HP’s 400 in‑lbs, while the 32,000 BPM hammer rate exceeds the Ryobi ONE+ Hammer’s 28,000 BPM. The high‑speed setting also tops the DeWalt DCD771B’s 1,500 RPM ceiling, giving the Kobalt a clear edge in speed and impact performance.

Reviewers consistently praise the drill’s “raw power” and note that the 2.0 Ah Li‑ion battery provides enough runtime for extended masonry work. Professional testers highlighted the smooth variable‑speed trigger and the precise 24‑position clutch as useful for demanding applications. On the flip side, users mention that the 4.0‑lb weight can feel cumbersome for light household jobs, and a few have reported brief lock‑up when drilling through very tough metal, which aligns with the expert‑reviewer observations.

Best for: Those prioritizing quality and willing to pay for premium performance — the Kobalt 24‑Volt Max Drill offers a 2.0 Ah battery and industry‑leading torque.

Avoid if: You're on a tight budget or only need basic functionality, especially for light household tasks.

TL;DR: The Yougfin 20V cordless drill offers 280 in‑lbs of torque, a 1.5 Ah battery and a 46‑piece accessory kit for $24.99, delivering a capable entry‑level tool for casual DIY projects.

The standout spec is its maximum torque of 280 in‑lbs paired with a 2‑speed gearbox that reaches up to 1 400 RPM, giving you enough power for wood and metal drilling around the home. It runs on a 20V MAX lithium‑ion battery rated at 1.5 Ah and fits comfortably in smaller hands thanks to its pink, ergonomic design and a lightweight 4.3 lb body.

Compared with the other drills in this roundup, the Yougfin is heavier than the DEKO PRO (2.5 lb) and the Fadakwalt (3.14 lb) but lighter than the Comoware (5.2 lb). Its 11.6‑inch height and 10.0‑inch length also make it larger than the compact DEKO PRO (2.0 in tall and long) while still fitting most workspaces. The 46‑piece accessory set outstrips the Comoware’s 34‑piece kit, giving beginners a more complete starter bundle.

Consumer feedback highlights the drill’s value and the ergonomic feel for users with smaller hands, while professional reviewers note the flexible shaft extender as a handy way to reach tight spots. The most common complaints focus on the plastic‑heavy build, with the chuck occasionally slipping under load, and the 1 400 RPM top speed feeling modest compared with faster‑spinning rivals.

Under the hood, the brushed motor drives a keyless metal 3/8‑inch chuck, and the variable‑speed trigger lets you dial in speed precisely. With 25+1 torque settings and an LED work light, the drill balances control and visibility for everyday tasks.

Best for: Budget-conscious buyers seeking a reliable entry-level option — the Yougfin Cordless Drill offers Battery Capacity: 1.5Ah

Avoid if: You need a tool for heavy construction, framing, or high‑speed drilling tasks.

TL;DR: The Bosch GSR12V‑140FCB22 packs a 265 in‑lbs max torque, 20 + 1 clutch settings and a 5‑in‑1 FlexiClick system into a 1.4 lb, 7‑in‑tall package, making it a premium yet highly versatile 12V drill.

This drill’s standout spec is its 20 + 1 clutch positions combined with a max torque of 265 in‑lbs, all driven by an EC Brushless motor. The tool weighs just 1.4 lb, measures 7 in high, 5.2 in long and 2 in wide, and ships with two 12V 2.0 Ah lithium‑ion batteries plus a carrying bag.

Compared with the other eleven contenders, the Bosch is lighter than the Makita DF330DWSP (≈2.2 lb) and the Kobalt 24‑Volt Max (4.0 lb), yet a bit heavier than the Ryobi ONE+ HP Drill (2.1 lb). Its 265 in‑lbs torque sits well below the Kobalt’s 850 in‑lbs but exceeds the DeWalt DCD771B’s 230 ft‑lbs (different unit) and is competitive against the Ryobi hammer’s unspecified torque. The 20 + 1 clutch range is richer than Makita’s 18‑stage setup and DeWalt’s 16‑stage, while matching the 24‑stage offerings of Kobalt and Ryobi hammer models.

Reviewers consistently praise the compact size and the FlexiClick 5‑in‑1 attachment system, noting how the keyless 1/4 in chuck, locking bit holder, right‑angle, offset angle and magnetic holder turn the drill into a “Swiss Army knife” for tight spaces. Professional reviewers highlight the strong torque for a tool this small. The main complaints revolve around the 12V platform, which some users say falls short on heavy‑duty fasteners, and the lack of a lock‑on switch that can lead to hand fatigue during prolonged use.

Additional technical context includes a 2‑speed transmission, no‑load speeds of 0‑400 rpm (low) and 0‑1,300 rpm (high), and a variable‑speed trigger. The included 2 × 12V 2.0 Ah batteries give you the freedom to work cordless, and the EC Brushless motor promises longer life and efficiency.

Best for: Buyers willing to invest in a proven, high‑quality option — the Bosch GSR12V‑140FCB22 offers Chuck Size: 1/4 in.

TL;DR: The Pulituo 20V cordless drill delivers 30 Nm of torque, two 1.5 Ah batteries and a full bit kit for about $34, making it a solid mid‑range choice for DIY projects.

This drill’s standout spec is its 30 Nm maximum torque, driven by a brushed 20 V motor, and the inclusion of two 1.5 Ah Li‑ion batteries that let you swap cells and keep working while the other charges. An integrated LED work light and a keyless 3/8‑inch chuck round out the core features.

At 4.96 lb, the Pulituo sits between the lightweight DEKO PRO (2.5 lb) and the heavier Comoware (5.2 lb). It also ships with a larger accessory set—28 bits total, plus a charger, extension bar and flexible shaft—where many rivals list fewer bits or only mention a generic count.

Users praise the dual‑battery setup and the ample torque for assembling furniture, cabinets and light‑to‑medium repairs. Professional reviewers note the LED light’s usefulness in cramped spaces, but they also point out the lack of an on‑tool battery indicator and a snug battery‑release latch that can feel stiff at first.

The drill offers two speed ranges (0‑400 RPM and 0‑1500 RPM) and 21+1 torque settings, giving you fine control without a clutch selector. Its brushed motor and 20 V supply keep the tool affordable while still delivering the power needed for typical home tasks.

Best for: Most users seeking a balanced, mainstream option — the Pulituo 20V Cordless Drill offers Battery Capacity: 1.5 Ah

TL;DR: The Makita DF330DWSP packs a 10.8 V motor, 24 N·m max fastening torque and a 189 mm ultra‑compact body, but its $201 price makes it a premium choice for light‑duty tasks.

The standout spec is its 24 N·m max fastening torque on hard materials, backed by a lock torque of 22 N·m and 18 clutch settings plus a drill mode. Those numbers give you enough bite for most DIY fastening jobs while still keeping the tool controllable.

Compared with the other eleven drills, Makita sits on the heavier side of the lightweight camp at about 2.2 lb (1000 g), lighter than the Bosch GSR12V‑140FCB22 (over 6 lb) but a touch heavier than Ryobi’s HP model (around 2.1 lb). Its price tag is higher than the sub‑$100 options like Ryobi ONE+ and DeWalt, placing it in the premium tier of the lineup. The 18‑stage clutch falls between Bosch’s 20 + 1 positions and DeWalt’s 16 + drill mode, while its 1.3 Ah Li‑ion battery is smaller than the 2.0 Ah packs found in Bosch and Kobalt.

Reviewers consistently praise the drill’s ultra‑compact 189 mm length and lightweight feel, noting that the built‑in LED light and keyless 10 mm chuck make tight‑spot work a breeze. Professional reviewers highlight the precise torque control and the ability to drive 5/8″ paddle bits through 2×6 lumber at high speed. The most common complaints revolve around the modest 1.3 Ah battery, which many say needs recharging after a short burst of use, and the modest 115 W output that can struggle with dense materials.

Beyond torque, the drill runs at 0–1,300 rpm on high speed and 0–350 rpm on low, giving you a wide speed range for both drilling and fastening. With a 10.8 V system, a 50‑minute charge time, and a keyless 10 mm chuck that accepts bits up to 21 mm in wood, the DF330DWSP balances power and portability for everyday projects.

Best for: Those prioritizing quality and willing to pay for premium performance — the Makita DF330DWSP offers Clutch Settings: 18 stages + drill mode

TL;DR: The Ryobi ONE+ 18V Hammer Drill packs 515 in‑lbs of torque, a 24‑position clutch and up to 28,000 BPM hammering, delivering solid masonry power for DIYers willing to invest $77.99.

This drill’s headline spec is its 515 in‑lbs of torque, paired with a hammer rate that ranges from 0‑28,000 BPM. The two‑speed gearbox delivers 0‑450 RPM on low and 0‑1,750 RPM on high, letting you switch smoothly between delicate wood work and hard‑core concrete drilling.

At 3.14 lb, it’s heavier than the DEKO PRO 20V (2.5 lb) and the Ryobi ONE+ HP Drill (2.1 lb), but only a shade lighter than the DeWalt DCD771B (3.28 lb). Its 24‑position clutch plus a dedicated hammer mode outpaces the DeWalt’s 16‑position clutch and matches the Ryobi HP’s 23 + 1 setting, giving you finer torque control than many budget rivals.

Users consistently praise the fast concrete‑drilling capability and the secure 1/2 in. keyless ratcheting metal chuck. A common complaint is the limited runtime that stems from the brushed‑motor design, and several reviewers note the 3.14 lb weight can cause fatigue during prolonged tasks. Professional reviewers also point out that while the motor is powerful, it generates more heat than brushless alternatives.

The drill runs on any Ryobi 18V ONE+ battery (battery not included) and features an on‑board LED worklight for dim spaces. The variable‑speed trigger and metal chuck make bit changes quick and keep bits firmly seated under load.

Best for: Those prioritizing quality and willing to pay for premium performance — the Ryobi ONE+ Hammer Drill offers Chuck Size: 1/2 in.

Avoid if: You have limited desk space or need portability