Best Tilt‑Only TV Mounts

TL;DR: The Amazon Basics Tilt 40‑inch mount offers 21‑inch extension, 12° tilt range, and supports TVs up to 40 lbs, all for $15.70, earning a 4.6‑star rating from nearly 60 k reviewers.

This mount’s standout spec is its 21‑inch extension, which stretches to 23 inches when the maximum tilt is applied. Combined with a tilt range of +9° to -3° (a total of 12°), it lets you pull a 12‑40‑inch screen out far enough for comfortable viewing while still keeping a low profile. The unit can hold TVs weighing up to 40 lbs (18.2 kg) and fits VESA patterns from 75×75 mm to 200×200 mm.

Compared with other budget‑friendly options in the roundup, the Amazon Basics mount is lighter than the Pipishell model (480.8 g vs 939 g) and has a shallower depth of 223.5 mm versus Pipishell’s 441 mm. It also carries a lower maximum TV weight capacity than Pipishell’s 44,906 g rating, but its price point sits below the Perlesmith and Mounting Dream offerings, making it the most economical full‑motion choice. Its single‑stud design is lighter than the Amazon Basics 86‑inch version, which tips the scales at 5.86 lb.

Reviewers consistently praise the mount’s easy, pre‑assembled installation and the smooth swivel and tilt motion once it’s up on the wall. Professional reviewers note the “super easy install” on larger screens and appreciate the flexibility of full left/right articulation. The main complaint is that tilt adjustments require loosening screws, which some users find less convenient than a tool‑free mechanism. A few also mention a small wall gap on textured surfaces and a 1‑2 inch protrusion when the arm is retracted.

The mount uses a 1/8‑inch pilot‑hole drill bit for wood studs and recommends a bottom offset of 3 inches from the floor. It's compatible with standard 16‑inch stud spacing and comes with lag screws, drywall screws, TV mounting bolts, a snap‑on cover, and a leveling tool, covering everything you need for a single‑stud installation.

Best for: Budget‑conscious buyers seeking a reliable entry‑level option

Avoid if: You need a tool‑free tilt mechanism or have an ultra‑large, heavy TV that exceeds 40 lbs

TL;DR: At $19.98, the Perlesmith Tilt‑Only TV Mount handles screens up to 85 inches and 132 lb, offers a 7° downward tilt, and earns a 4.6‑star rating from over 67 k reviewers.

This mount’s standout spec is its 132 lb maximum weight capacity, letting you hang most 37‑85 inch TVs without a second bracket. The cold‑rolled steel construction keeps the unit sturdy while the 7° down‑tilt lets you reduce glare without over‑extending the screen. With a retracted profile of 1.2 in and an overall depth of 26.4 in, the mount stays close enough to the wall for most living‑room setups.

Compared with the other eleven options in the roundup, the Perlesmith sits near the top of the capacity ladder: it out‑matches the 40 lb limit of the Amazon Basics 40‑inch tilt mount and sits just below the 150 lb ceiling of the Amazon Basics 86‑inch model. Its 26.4‑in depth is deeper than the Pipishell’s 441 mm design, yet it remains lighter than the Amazon Basics 86‑inch unit (5.86 lb) while still heavier than the ultra‑light Amazon Basics 40‑inch version (1.06 lb). Price‑wise it's far cheaper than full‑motion alternatives such as Mounting Dream or Echogear, which sit in a higher price tier.

Users consistently praise the easy angle adjustments and the solid feel of the steel build. Professional reviewers highlight the UL‑listed certification and the inclusion of safety features like anti‑drop edges and pull‑cord locks. The most common complaint is the need for stud, concrete, or brick anchoring – drywall‑only walls require additional hardware, and the 15.06‑lb package can be a bit cumbersome to lift.

Additional technical notes: the mount supports VESA patterns from 200×100 mm up to 600×400 mm (excluding 100×100 mm), and the manufacturer offers a five‑year warranty. Post‑install leveling lets you fine‑tune the angle by ±3°, and the package arrives in a 17.32 × 12.13 × 2.91‑in box.

Best for: Budget‑conscious buyers seeking a reliable entry‑level option for large TVs with tilt adjustment.

Avoid if: You have drywall‑only walls, need ultra‑low‑profile mounting, or are installing a small TV under 37 inches.

TL;DR: The Sanus Tilting TV Wall Mount holds up to 150 lb, tilts 12°, and installs in about 30 minutes, making it a solid choice for larger screens when you want reliable tilt‑only support.

The standout spec is its 150 lb maximum load, which comfortably covers most 46‑90‑inch TVs in the listed screen‑size range. Coupled with a 12‑degree tilt angle, you can lower glare or achieve a more ergonomic viewing height without the need for a full articulating arm. The mount’s 5.7‑inch extension also gives enough clearance for rear‑panel cables, and the open wall‑plate design keeps those cables tidy.

Compared with the other eleven mounts in this roundup, Sanus is remarkably lightweight at 0.000625 lb, far lighter than the Rocketfish model’s 6 lb and the Peerless PT650’s 10.3 lb. It costs about the same as Rocketfish’s offering but out‑loads it with a higher weight capacity (150 lb vs. Rocketfish’s 130 lb). While some competitors provide dual tilt‑and‑height adjustment, Sanus focuses solely on tilt, which keeps the profile slim and the installation simple.

Users consistently award the mount a 4.8‑star average across 3,620 reviews, praising the straightforward 30‑minute install and the sturdy feel once mounted. Reviewers also like the open wall‑plate cable management that reduces clutter behind the TV. A few comments note the limited 12‑degree tilt range, wishing for a broader adjustment, but most find it sufficient for typical living‑room setups.

Additional technical details include VESA compatibility from 200×100 mm up to 690×415 mm, a 32.5‑inch mounting length, a 10.9‑inch width, and a modest 3.0‑inch height. These dimensions keep the mount low‑profile while still accommodating the larger screen sizes advertised.

Best for: Buyers willing to invest in a proven, high‑quality option

Avoid if: You're on a tight budget or only need basic functionality

TL;DR: The Pipishell Tilt TV Wall Mount offers an ultra‑low 1.3‑inch profile, -8° anti‑glare tilt and a massive 9,900‑lb weight capacity for just $17.99, making it a solid budget pick for small‑space installs.

What really sets this mount apart is its slim 1.3‑in profile combined with a 441 mm depth, letting even larger screens sit flush against the wall. At only 939 g, the bracket is lightweight yet has a staggering maximum weight capacity of 44906 g (about 9,900 lb), far exceeding the needs of most home TVs.

Compared with the other eleven options, the Pipishell is heavier than the Amazon Basics 40‑inch tilt (480.8 g) but lighter than the Perlesmith model, which tips the scales at 4.0 lb. Its profile is on par with Perlesmith’s 1.2‑in retraced design, while the Amazon Basics 86‑inch mount reaches a deeper 447 mm – meaning the Pipishell stays closer to the wall than many competitors. The tilt range of 0° to –8° is modest but matches the –5° to +10° offered by the larger Amazon Basics 86‑inch mount.

Users consistently praise the ultra‑low look and the anti‑glare tilt that helps reduce reflections in bright rooms. Reviewers also note that the open‑wall‑plate design makes cable routing easier. The main complaints revolve around the installation requirement: you must anchor the mount to wood studs or solid concrete/block, and the guidance advises against using an electric drill, which can slow the setup. Because it’s a fixed‑tilt bracket, anyone needing swivel or full‑motion adjustment must look elsewhere.

Best for: Budget‑conscious buyers seeking a reliable entry‑level option

Avoid if: You need full‑motion swivel, plan to mount on drywall without studs, or require a drill‑free install

TL;DR: The Echogear TV Wall Mount offers a 22‑inch extension, 130° swivel and 15°‑down tilt for 42‑90″ screens up to 125 lb, all for $39.99 and a five‑year warranty.

What really sets this mount apart is the generous 22‑inch extension, letting you pull the TV far enough from the wall for fireplace clearance or cable routing while still folding back to a slim 2.4‑inch profile. Heavy‑gauge steel construction and a 130° swivel range give you plenty of flexibility for multi‑angle viewing, and the ±3° post‑install leveling lets you fine‑tune the picture after the job is done.

Compared with the other eleven options, the Echogear sits on the higher end of weight capacity at 125 lb—just above the Mounting Dream Tilting’s 120 lb limit and below the Amazon Basics model’s 150 lb ceiling. Its 2.4‑inch depth is a hair slimmer than Mounting Dream’s 2.5‑inch profile, and its 22‑inch extension outpaces the Mounting Dream Advanced Tilt’s 7‑inch pull‑out. While the Perlesmith and Pipishell mounts list shallower profiles, they also support lower maximum weights, so the Echogear offers a solid middle ground of strength and reach.

Reviewers consistently praise the mount’s easy‑to‑follow drilling template and the included hardware kit, noting that the installation feels straightforward for anyone comfortable with stud work. The 130° swivel and 15°‑down tilt are highlighted as especially useful for living‑room setups where you want to watch from different seats. The main complaint is the limitation to 16‑24‑inch wood or concrete studs; metal studs are not supported, which can be a deal‑breaker for some renters. Users also mention that the 125‑lb limit rules out the heaviest large‑screen models, so double‑check your TV’s weight before buying.

Beyond the core mechanics, UL lists the mount for safety and includes a five‑year warranty, giving peace of mind for long‑term use. Its VESA compatibility spans 200×100 mm to 600×400 mm, covering the vast majority of 42‑90″ TVs on the market. The tilt range of 15° down and 5° up provides enough vertical adjustment for most wall‑mount scenarios without sacrificing the sleek look.

Best for: Homeowners with 42‑90″ TVs up to 125 lb who need full‑motion flexibility and a solid, well‑reviewed mount for a living‑room or family‑room setup.

TL;DR: The Echogear No Stud mount scores 4.8/5 from 3,520 reviewers, fits TVs up to 77″, clears just 1.18″ from the wall, and installs in under 15 minutes without drilling.

This mount’s standout feature is its stud‑free installation: 32 nails spread the load across drywall, so you never have to hunt for studs or drill. The low‑profile design leaves only 1.18 in of clearance when the TV is flush, and extends to 2.25 in when you tilt the screen to cut glare.

Compared with the other eleven options, the No Stud stays slimmer than the deeper‑profile mounts and avoids the heavier, stud‑only solutions that dominate the list. While full‑motion models tend to carry higher price tags and bulkier hardware, this unit keeps the package light and budget‑friendly, making it a solid middle ground for renters and first‑time installers.

Users repeatedly praise the clear, humorous instructions and the built‑in bubble level that helps you get a straight mount the first time. The magnetic standoffs add a tidy finish, and the safety button gives extra peace of mind. Professional reviewers note the sleek 2.25‑inch tilt range and the durability of the steel construction, though they also point out that the wall‑plate can be fiddly and sometimes you’ll need a stud finder for best results.

Best for: Most users looking for a well‑reviewed, reliable mainstream option

TL;DR: The Rocketfish Tilting TV Wall Mount offers a sleek 1.9‑inch low‑profile design, fingertip tilt from –5° to +15°, and a solid 130‑lb capacity for 32‑ to 90‑inch screens at $99.99.

This mount’s standout spec is its ultra‑thin 1.9‑inch depth, which keeps even a large TV close to the wall for a clean look. It also provides a dual‑adjustment system: tilt ranging from –5° to +15° and a 15.5‑inch height‑adjustment range, letting you fine‑tune viewing angles without tools.

Compared with the other eleven contenders, the Rocketfish is lighter than the Peerless PT650’s 10.3‑lb package, yet it still supports a hefty 130‑lb load—more than the Mounting Dream Tilting’s 120‑lb limit. Its tilt range exceeds the Sanus model’s 12‑degree tilt, giving you a broader viewing angle while many peers only list tilt without height adjustment.

Buyers consistently praise the powder‑coat finish and the smooth fingertip tilt mechanism, noting you can easily reposition the TV. However, several reviewers question the advertised 90‑inch compatibility, especially when paired with TVs that approach the 130‑lb weight ceiling, and advise caution for larger, heavier sets.

Additional technical touches include a secure locking mechanism for the tilt angle and VESA compatibility up to 700 × 400 mm, which ensures a sturdy fit for most modern panels.

Best for: Owners of 32‑70 inch TVs who want a sleek, low‑profile wall mount with easy fingertip tilt and height adjustment.

Avoid if: You have a 75‑inch or larger TV that exceeds 130 lb, or you need a full‑motion/articulating solution.

TL;DR: The Mounting Dream Tilting mount holds 42‑86" TVs up to 120 lb, offers a 20° tilt range, and comes with all needed hardware for a solid stud‑wall install at $39.99.

The mount’s standout spec is its 120 lb weight capacity paired with a low‑profile 2.5 in thickness, letting you keep a large screen close to the wall while still supporting heavier models. Its tilt mechanism covers a total of 20° (15° forward, 5° backward), which helps cut down on glare without sacrificing a sleek look.

In price it lands in the same tier as the Echogear TV Wall Mount, yet its profile is marginally thicker than Echogear’s 2.4 in depth, giving a bit more clearance for cable routing. Compared with the ultra‑light Pipishell Tilt model, the Mounting Dream version is heavier and supports larger screens, while still offering a broader VESA range (up to 800×400 mm) than many peers.

Customers consistently applaud the mount’s sturdy feel and the ease of centering the TV on the wall, noting that the strong hold reduces wobble. Professional reviewers highlight the solid construction and smooth tilt control via the included Allen wrench, but they also point out that precise stud alignment and drilling require careful setup – a common snag for DIY installers. The need for tools to fine‑tune tilt is a minor inconvenience that shows up in several user comments.

You can install only on stud walls (16, 18, or 24 in spacing), and the kit includes concrete wall anchors (φ10×50 mm), leveling bolts with up to ±1° adjustment, and M8 × 125 mm mounting bolts. The tilt adjustment tool and level bolts let you dial in a perfect viewing angle, while the VESA compatibility from 200×100 mm to 800×400 mm covers most modern TVs in the 42‑86" range.

Best for: Most users looking for a well‑reviewed, reliable mainstream option

TL;DR: The Mounting Dream Advanced Tilt offers a 7‑inch pull‑out extension, 2‑15° tool‑free tilt and a solid 120‑lb capacity for $62.99, but it carries a higher price than some basic tilt mounts.

This mount’s standout feature is the 7 in pull‑out extension that lets you reach the back of a 42‑90″ TV for cable swaps without removing the whole unit. The tilt mechanism works with thumb knobs and provides a 2‑15° downward angle, so you can reduce glare without a screwdriver. At 14 lb the mount itself is sturdy, and it supports TVs up to 120 lb.

Compared with the Mounting Dream Tilting model, the Advanced Tilt is pricier but adds the longer extension and tool‑free tilt that the lower‑priced sibling lacks. Its 7 in extension also beats the 5.7 in extension listed for the Sanus tilting mount, while the weight capacity matches the 120 lb rating of that same competitor. The Amazon Basics tilt mount is lighter at about 5.86 lb and cheaper, but it only handles up to 150 lb and doesn’t offer the same pull‑out reach. The Rocketfish and Echogear models list slightly higher weight capacities (130 lb and 125 lb respectively) but provide shallower depth profiles, whereas the Advanced Tilt’s retracted depth is 2.68 in.

Professional reviewers highlight the thumb‑knob tilt as “extremely easy to adjust” and praise the quick‑disconnect pull‑tabs for fast removal. Everyday owners echo this sentiment, noting the secure hold and the convenience of the 7‑inch reach when swapping HDMI cords. The most common complaint is the need for a stud or plywood backing on non‑standard walls, which can limit installation options on bare drywall.

Best for: Homeowners and office users mounting 42‑90″ TVs (up to 120 lb) who need easy downward tilt and convenient cable access.

Avoid if: You're shopping on a tight budget — it's priced at $62.99, or you need full‑motion swivel or a mount for bare drywall without studs.

TL;DR: The Amazon Basics Tilt 86‑inch Black mount handles TVs up to 86″ and 150 lb, offers a +10°/‑5° tilt, and scores 4.6 stars for just $26.09.

This mount’s standout spec is its 150 lb maximum TV weight capacity, letting you securely hang screens as large as 86 inches. At 5.86 lb, the bracket feels solid without being overly heavy, and its 17.6 in depth keeps the TV relatively close to the wall.

Compared with the other eleven mounts, Amazon Basics is heavier than the Perlesmith (4.0 lb) and Pipishell (≈2 lb) models, but it also lifts more weight—150 lb versus Perlesmith’s 132 lb and Pipishell’s roughly 99 lb capacity. Its tilt range of +10° upward to –5° downward gives more upward adjustment than Pipishell’s 0° to –8° down‑only tilt, while Perlesmith only tilts 7° down. The 17.6 in depth is shallower than Perlesmith’s 26.4 in profile, meaning a slimmer look on the wall.

With a 4.6‑star rating from 3,147 reviewers, most owners praise the mount’s sturdy feel and straightforward installation on concrete, brick, or wood studs. Users also like the broad VESA compatibility (200×100 mm to 600×400 mm), which covers most modern TVs. The two‑year manufacturer warranty adds peace of mind, and it’s budget‑friendly.

Best for: Budget‑conscious buyers seeking a reliable entry‑level option

Avoid if: You want the best value‑per‑dollar in its price range

TL;DR: The Peerless PT650 offers a sturdy 68 000 g load capacity, a low‑profile 67 mm minimum depth, and a 20° tilt range, but it sits at a premium $119 price point.

The standout spec on the PT650 is its 68 000 g (about 150 lb) load capacity, which far exceeds the needs of most 39‑75″ flat‑panel TVs. Its minimum mounting depth of 67 mm (roughly 2.6 in) keeps the screen close to the wall, while the horizontal adjustment of 203 mm lets you fine‑tune the picture position. The tilt mechanism moves from +15° forward to –5° backward, giving a total 20° tilt range for glare reduction.

At 10.3 lb, the PT650 is noticeably heavier than the Sanus tilt mount, which weighs less than a pound, and it also carries a higher price tag than many budget‑oriented options in this roundup. While the mount’s feature set is extensive, its minimum depth of 67 mm is deeper than the ultra‑slim profiles some competitors advertise, making it a bit less ideal for ultra‑low‑profile installations.

Reviewers consistently praise the mount’s solid construction and the ease of the Hook‑and‑Hang™ one‑person installation system. Users also like the optional IncreLok™ tilt lock for precise angle holding. The most common complaint cites the need for a separate metal stud accessory when mounting to concrete or metal studs, which adds an extra step and cost. Professional reviewers highlight the UL listing and scratch‑resistant fused epoxy gloss black finish as indicators of long‑term durability.

Best for: Those prioritizing quality and willing to pay for premium performance

Avoid if: You're shopping on a tight budget — it's priced at $119.00

TL;DR: The Peerless‑AV ST670P is a heavy‑duty tilt‑only wall mount that supports 46‑90‑inch screens up to 250 lb, offers up to 12 in of horizontal shift and a +15°/‑5° tilt, but carries a premium price.

The ST670P’s standout spec is its 250 lb (113 kg) load capacity, which lets you mount large 46‑90‑inch panels with confidence. It also provides a tilt range of +15° upward and -5° downward, and up to 12 in (305 mm) of horizontal adjustment, giving you flexibility for optimal viewing angles.

Compared with the other mounts in this roundup, the ST670P carries a higher price tag and is heavier at 14.77 lb versus the ultra‑light Sanus model (0.000625 lb) and the Rocketfish mount (6.0 lb). Its load capacity far exceeds the Peerless PT650 (68,000 g), Rocketfish (130 lb), Mounting Dream Advanced Tilt (120 lb) and Echogear (125 lb) options. Horizontal adjustment is also generous: the PT650 offers about 203 mm of shift, while the ST670P reaches the full 12 in (305 mm). In terms of weight, it sits between the PT650’s 10.3 lb and the Mounting Dream Advanced Tilt’s 14 lb, making it solid but not the lightest choice.

User feedback highlights the mount’s robust steel construction and the scratch‑resistant fused epoxy finish, which many reviewers appreciate for durability. Reviewers frequently cite the five‑year UL‑listed warranty as a confidence booster. On the downside, the 3.4‑star rating from 78 reviews points to mixed satisfaction, with complaints about the high price and the lack of swivel capability limiting off‑center installations. Some buyers also note inconsistent dimension listings across retailers, which can cause confusion during planning.

Technically, the mount features a universal VESA pattern up to 895 × 450 mm, a maximum depth of 6.63 in and a minimum depth of 3 in, and comes packaged in a 38.80 in × 4.30 in × 15.20 in box weighing 19.13 lb. The steel plate measures 18.63 in × 13.75 in, and manufacturers design it for indoor use only.

Best for: Those prioritizing quality and willing to pay for premium performance

Avoid if: Reliability and user satisfaction are your top concerns