Ubiquiti NanoStation locoM2
Score: 75/100
TP-Link CPE710
Score: 81/100Rankings
The TP-Link CPE710 is a rugged outdoor 5 GHz wireless bridge featuring a 23 dBi directional antenna and IP65 rating, delivering up to 867 Mbps for long-range point-to-point links. It is limited to the 5 GHz band and requires precise alignment due to its narrow beamwidth. Ideal for enterprises and ISPs needing high-performance outdoor backhaul.
The Ubiquiti NanoStation locoM2 delivers up to 150 Mbps on the 2.4 GHz band with a compact 8-dBi antenna and remote reset capability. Its single-band design and limited Ethernet speed can be drawbacks in high-traffic scenarios. Ideal for small-to-medium WISPs or rural sites needing an affordable, low-power backhaul over a few kilometres.
| Attribute | | |
|---|---|---|
150 Mbps | 867 Mbpsbest | |
1best | 1best | |
| ↓ lower better | 180 gbest | 1,000 g |
5,000 mbest | — | |
| ↓ lower better | 6 Wbest | 7.3 W |
8.5 dBi | 23 dBibest | |
24 Vbest | — |
Click an attribute name to sort · Green = best, red = worst (relative to this comparison)
| Attribute | | |
|---|---|---|
Connectivity(2) | ||
Supported Wi‑Fi Standards | 802.11n | 802.11ac |
Frequency Bands (GHz) | 2.4 | 5.15-5.85 |
Ports(1) | ||
Ethernet Port Speed | 100 | 1000 |
Performance(2) | ||
Maximum Data Rate (Mbps) | 150 Mbps | 867 Mbps |
Antenna Gain (dBi) | 8.5 dBi | 23 dBi |
Battery & Power(2) | ||
Power Consumption (W) | 6 W | 7.3 W |
Input Voltage (V) | 24 V | 16-27 V |
Build & Design(3) | ||
Weight (g) | 180 g | 1000 g |
Dimensions (L×W×H) (mm) | 30 x 80 x 180 mm | 207x280x366 mm |
Mounting Options | Pole | Pole‑mount |
General(1) | ||
Operating Temperature (°C) | -30 to 75 °C | -40-70 °C |
Products in the top-left offer the best value (high score, low price).
Professional reviewers emphasize the locoM2's low-latency AirMAX TDMA protocol, carrier-class scalability, and its integrated dual-polarized antenna that delivers solid gain and isolation. They also note the device's rugged outdoor enclosure and intelligent passive PoE with remote reset as strong points, while calling out the limitation to the 2.4 GHz band and the older processor/memory as potential drawbacks for future-proofing.
Everyday users generally praise the device's easy plug-and-play installation, lightweight form factor, and low power draw, especially for remote or solar-powered sites. Recurring concerns revolve around 2.4 GHz interference in crowded areas, the lack of Gigabit Ethernet, and occasional performance limits due to the older hardware.
Professional reviewers describe the CPE710 as a high-performance outdoor bridge that excels in noisy, long-distance scenarios. B&H Photo and CDW commend its 23 dBi antenna, 2×2 MIMO, and 867 Mbps AC throughput, while emphasizing the rugged IP65 enclosure and Pharos Control for easy centralized management.
User-generated feedback is scarce in the available sources, so direct consumer sentiment cannot be quantified. The product's marketing and specifications suggest users would appreciate its long-range capability and weather resistance, while potential concerns would revolve around the need for precise alignment and the lack of 2.4 GHz support.
Choose CPE710 for maximum range; choose NanoStation for easier setup in less demanding distances.
